| Air Filter - HP, Angled Flange / 43mm |
 |
Air Filter Adapter/ Velocity Stack - Cag |
|
Air Filter and Stack - Saucer |
|
|
|
|
 |
 |
 |
| This high performance air filter element allows for greater airflow and improved performance. Its mounting flange is angled at 20 degrees to allow for an easy fit in tight spaces.
* This filter is most commonly used on two cycle engines.
Flange Inside Diameter: 1.7 in (43 mm)
Flange Length: 0.625 in (75 mm)
Height: 3 in (80 mm)
|
Billet aluminum velocity stack air filter adapter for 47cc or 49cc pocket bikes, pocket quads and other same style engines that use the 25h chain. |
High performance air filter element allows for greater airflow and improved performance.
|
|
| Air Filter and Stack - Straight |
|
Brake Lever - Adjustable |
|
Brake Lever Set - 2 Finger Racing Brake Levers, Pair |
|
|
|
|
 |
 |
 |
High performance air filter element allows for greater airflow and improved performance.
|
Adjustable brake lever allows you to adjust the angle of the brake lever relative to the handle bar. |
2 finger aluminum racing brake lever set. |
|
| Cag - Cable Bracket for Walbro Carb |
|
Carburetor Kit 1 - HP with Saucer Air Filter |
|
Carburetor Kit 1 - HP with Straight Air Filter |
|
|
|
|
 |
 |
 |
| |
This kit includes the fully adjustable high performance Walbro style carburetor with air and fuel mixture adjustments, the high performance air filter and velocity stack. This kit will improve throttle response, acceleration and top end as well as keep your engine running cleaner. |
This kit includes the fully adjustable high performance Walbro style carburetor with air and fuel mixture adjustments, the high performance air filter and velocity stack. This kit will improve throttle response, acceleration and top end as well as keep your engine running cleaner. |
|
| Clutch - C-Clip Front - Cag |
|
Clutch - Racing Clutch, Cag |
|
Clutch - Third Bearing Support - Cag |
|
|
|
|
 |
 |
 |
| This c-clip is used to hold the bearing in place for your stock and performance bell housing. |
Fits:
> 1G, 2G, MX3 and MX5 |
Replacement third bearing support.
Includes bearing and bolts. |
|
| Clutch Bell Housing - Cag, Vented |
|
Clutch Bell Housing - Chrome High Performance, Ventilated w/ 3rd Bearing Support |
|
Clutch Drum - Vented for 10mm Pinion Thread |
|
|
|
|
 |
 |
 |
| Vented clutch bell housing keeps your clutch cooler for racing and longer life |
High performance chrome plated, vented clutch bell housing with 3rd bearing support for increase durability and strength. |
|
|
| Crank Shaft - High Performance Full Circle Crank |
|
Exhaust - Cag, Pro Jet Pipe |
|
Exhaust - Performance, Cag |
|
|
|
|
 |
 |
 |
| HP Cylinder Kits with Full Circle Crank and Circle Cut Head-12mm pin |
HP exhaust pipe for mini 47cc and 49cc pocket bikes. Increases horse power and overall performance. Works best if used with a performance air filter.
Includes:
> Mounting bolts and gaskets
|
HP exhaust pipe for mini 47cc and 49cc pocket bikes.
Increases horse power and overall performance. Works best if used with a performance air filter |
|
| Flywheel, Lightweight - Cag |
|
Foot Peg Set - Aluminum, Cag |
|
Fuel Cut-Off Valve |
|
|
|
|
 |
 |
 |
Description:
Lightened flywheel for the 47cc case reed engine. CNC machined for a 10% reduction in overall weight and to maintain proper balance. Weight is removed from the outside perimeter to decrease flywheel inertia, resulting in quicker throttle |
Description:
> Billet aluminum racing footpegs
Fits:
> 1G, 2G, MX3, MX5 and MTA4
|
|
|
| Fuel Line Filter |
|
Fuel Line Kit - Cag |
|
Grip - Colored Grip Set |
|
|
|
|
 |
 |
 |
Description:
> Fuel line filter to provide cleaner fuel to the engine
> Prolongs engine and carburetor life
Fits:
> All bikes
|
Description:
> Fuel line kit for use with the HP carburetor kit upgrade
Fits:
> 1G, 2G, MX3 and MX5 with carburetor upgrade# 523
|
These color grips can be used on any mini pocket bike, pocket quads, super pocket bikes, motor cycles and dirt bikes. |
|
| Head Kit - Billet Aluminum w/Dome and Full Circle Crank |
|
Intake Manifold, HP - Cag |
|
Lever, Brake - Blue, Pair |
|
|
|
|
 |
 |
 |
| Looking for more top speed and power band?
High compression 49cc/44mm ported and polished cylinder, boost ported race piston and billet aluminum dome head shell. Kit also includes 12mm full circle crank with wrist pin and bearings, gaskets and hardware.
Includes:
Racing Piston w/Boost Port (49cc/44mm)
Wrist Pin, bearing and clips (12mm)
Full Circle Crank (12mm)
Cylinder (49cc/44m)
Head
Dome
Spark Plug
Gaskets and Hardware.
Colors: Red, Blue, Gold, Silver Alloy
|
Fits:
> 1G, 2G, MX3 and MX5 |
|
|
| Pinion Wrench |
|
Piston Ring Pair, Racing - 1.5 mm |
|
Ported Piston, Piston Rings, Wrist Pin and Wrist Pin Bearing |
|
|
|
|
 |
 |
 |
| This wrench is specially designed to help you get a grip on the tiny pinions of the Cag clutch bell housing (part# CGBH301484). |
Thin race rings for the performance piston. |
You can replace your original piston with this ported piston. You see increased power if you use it with a ported cylinder. This kit comes with ported piston, piston rings, wrist pin, wrist pin bearings and C-clips. |
|
| Power Kit 3 - CAG |
|
Pull Start - Cag, Aluminum |
|
Pull Start Handle - Chrome |
|
|
|
|
| |
 |
 |
Includes:
> Air Filter
> Stack/ Air Filter Adapter
> Adjustable HP Carburetor
> Aluminum Intake Manifold
> High Performance Exhaust
> Timing Advance Key/ Rocket Key
> Light Weight Flywheel |
Pull start for 47cc and 49cc mini pocket bikes, pocket quads and other same style engines.
This pull start is constructed of durable cast aluminum with a metal starter pawl for increased durability.
|
This chrome pull start handle replaces most stock pull start handles. |
|
| Reed - Carbon Racing Reed |
|
Reed - Triple Stage Reed, CAG |
|
Sprocket - HP, 66 Tooth Rear - Cag |
|
|
|
| Our Price: $29.95 |
  |
|
 |
 |
 |
Fits:
> 1G, 2G, MX3 and MX5 |
Triple stage reed system
> Triple stage technology
> Easier starting
> Improves throttle response
> Stronger mid-range
> Adds top end power
> Increase power band and speed |
High performance rear sprocket (66 Tooth) for pocket bikes that use the size 25h chain.
Made from 7075-T6 Aircraft Quality Alloy for Superior Durability.
|
|
| Sprocket - HP, 67 Tooth Rear - Cag |
|
Sprocket - HP, 68 Tooth Rear - Cag |
|
Sprocket - Pinion, 6 Tooth Front - 8mm Thread Size |
| Our Price: $29.95 |
|
|
| Our Price: $29.95 |
|
|
|
 |
 |
 |
High performance rear sprocket (67 Tooth) for pocket bikes that use the size 25h chain.
Made from 7075-T6 Aircraft Quality Alloy for Superior Durability.
|
High performance rear sprocket (68 Tooth) for pocket bikes that use the size 25h chain.
Made from 7075-T6 Aircraft Quality Alloy for Superior Durability.
|
Stock front sprocket (6 Tooth) for mini pocket bikes, pocket quads and other same style engines that use the 25h chain. |
|
| Sprocket - Pinion, 7 Tooth Front - 10mm Thread Size |
|
Sprocket - Pinion, 7 Tooth Front - 8mm Thread Size |
|
Sprocket - Pinion, 8 Tooth Front - 8mm Thread Size |
|
|
|
|
 |
 |
 |
| |
Front 7 tooth pinion (sprocket) for 47cc or 49cc mini pocket bikes that use the 25h chain. |
Front 8 tooth pinion (sprocket) for 47cc or 49cc mini pocket bikes that use the 25h chain. |
|
| Sprocket - Pinion, 9 Tooth Front - 8mm Thread Size |
|
Sprocket, 60 Tooth Rear - Cag |
|
Sprocket, 62 Tooth Rear - Cag |
|
|
|
|
 |
 |
 |
Fits:
> 1G, 2G, MX3 and MX5 (25h chain) |
Stock rear sprocket (60 Tooth) for 25h chain for mini pocket bikes, pocket quads and other same style engines. |
Fits:
> 1G, 2G, MX3 and MX5 (25h chain) |
|
| Sprocket, 66 Tooth Rear - Cag |
|
Sprocket, 68 Tooth Rear - Cag |
|
Sprocket, 70 Tooth Rear - Cag |
|
|
|
|
 |
 |
 |
| Rear 66 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other bikes that use the same style engine that use the 25h chain. |
Rear 68 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other bikes that use the same style engine that use the 25h chain. |
Rear 70 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other bikes that use the same style engine. |
|
| Sprocket, 72 Tooth Rear - Cag |
|
Sprocket, 78 Tooth Rear - Cag |
|
Starter Pawl Alloy |
|
|
|
|
 |
 |
 |
Fits:
> 1G, 2G, MX3 and MX5 (25h chain) |
Rear 78 tooth sprocket for 47cc or 49cc mini pocket bikes, pocket quads and other bikes that use the same style engine that use the 25h chain. |
Replace your stock plastic inner claw with an aluminum claw. Fits 47-49cc mini pocket bike pull starter. |
|
| Steering Dampener - Adjustable |
|
Steering Dampener - Non-Adjustable |
|
Timing Advance Key/ Rocket Key - Cag 47cc - 49cc |
|
|
|
|
 |
 |
 |
| This adjustable steering dampener is a universal fit for all pocket bikes and acts to stabilize the front forks. The adjustment allows you to change the amount of resistance offered by the dampener. The installation of this item is unique for each bike. |
This steering dampener is a universal fit for all pocket bikes and acts to stabilize the front forks. The installation of this item is unique for each bike. |
Advances ignition timing 10 degrees. Increases acceleration and gain up to 2mph on top speed |
|
| Tire, Slick - 90/65-6.5 |
|
Tire, Slick - 110/50-6.5 and 90/65-6.5 |
|
Tire, Soft Comp - 110/50-6.5 |
|
|
|
|
 |
 |
 |
| Front practice tire for mini pocket bikes.
Dimensions: 90/65 - 6.5
|
Rear practice tire for mini pocket bikes with FREE front practice tire.
Rear Tire Dimensions: 110/50 - 6.5
Front Tire Dimensions: 90/65 - 6.5
*these tires are made of a harder compound so they last longer and can be used in practice for racing.
|
Soft compound, competition use rear tire for mini pocket bikes.
Dimensions: 110/50 - 6.5
|
|
| Tire, Soft Racing - 90/65-6.5 |
|
Tire, Water Tread - 110/50-6.5 |
|
Tire, Water Tread - 90/65-6.5 |
|
|
|
|
 |
 |
 |
| Soft compound, competition use front tire for mini pocket bikes.
Dimensions: 90/65 - 6.5
|
Water tread rear tire for mini pocket bikes.
Dimensions: 110/50 - 6.5
|
Water tread front tire for mini pocket bikes.
Dimensions: 90/65 - 6.5
|
|
Subscribe
SuperTuning.be
SuperTune.be
SuperTunes.net
